Cleaning

Tile Grout Cleaning Is a Must To Avoid Mold & Mildew

Mold Prevention & How To Remove It From Grout

Mold is a common issue in moist places with poor air circulation. Kitchens, bathrooms, and basements are the ideal places for it. Besides, tile grout is where mold is most often found, so cleaning should always be a must.

Many people use tiles in areas where moisture is abundant, making them particularly susceptible to mold. The porous nature of tiles also allows mold to grow quickly, which is why it requires extra care when cleaning it.

Before contacting a tile floor cleaning service in Anthem, see below some tips to clean your tile grout correctly.

How Can I Prevent Mold In Tile Grout?

Prevention is the best way to avoid mold. You can save yourself the time and effort of the mold cleaning by preventing it from appearing. All you have to do is to deprive it of its main requisite: humidity. By keeping your tiles dry you won’t have to worry about damaging microorganisms.

You can reduce the dampness of some areas (like the bathroom) by following these tips:

Keep doors and windows open to let the air flow through the house.

Let the bathroom window open for at least 15 minutes once you finish showering to move out excess moisture.

Ventilate other rooms that can condense moisture, for example, the laundry room and basement.

Wipe down the shower floor and walls once you finish bathing.

To simplify cleaning, use shower curtains that are easy to clean.

Hang your bath towels to dry immediately after using them.

Scrub your tiles regularly with a mold-prohibiting solution (at least once a week).

If you have leaky faucets or showerheads, fix them.

Seal the grout with one or two coats of a silicon-based grout sealer. It reduces the speed at which moisture penetrates the tile grout.

A Gilbert grout cleaning service can be useful if you think your tile grout is too dirty – for any DIY fix. However, if you follow the preventive tips from above, you should have a clean and maintained tile grout for a longer time.

How Can I Remove Mold From Tile Grout?

There are many methods to clean mold from grout. These are some of the most popular:

With Bleach

Chlorine bleach is the most popular cleaning agent to get rid of mold. It kills the mold spores while disinfecting the area, removing the buildup of soap residue from tiles.
To use this method, you only need to do the following:

Add one part of bleach to four parts of water and mix it well. Pour the mix into a spray bottle.

Spray the area with mold and wait for at least 30 minutes. After that, scrub the area with a brush.

Rinse the area with clear and freshwater before repeating the process (if necessary).

Bleach causes fading and discoloration, so you should not use it on colored grout.

With Baking Soda

Baking soda is not as hazardous as bleach, but it is still an excellent ingredient for ceramic tile & grout cleaning in Avondale. Just remember that it will only clean the area, it will not kill the mold spores. Follow these steps to use it in your tile grout:

Mix ½ cup of baking soda with 3.5 liters (one gallon) of water. Pour the mix into a spray bottle and spray the affected area.

Wait for half an hour or 45 minutes before rinsing the surfaces with warm water.

You can also create a paste with ½ cup of baking soda and a few teaspoons of water.

Apply the paste to the affected area, leave it for 10 minutes, and then scrub away with a brush.

With Salt

Salt is another efficient cleaning agent to kill single-cell organisms, including mold. To do so, you only have to rub the affected area with a damp cloth and sprinkle on salt. After that, scrub it into the grout lines. You can let it sit overnight and rinse the surfaces with fresh water in the morning.

With Vinegar

Vinegar is a common natural cleaning agent in almost any home. Thanks to its acidic nature, it inhibits bacterial growth. You should try using the vinegar at the first signs of mold on the grout. It is an excellent ingredient for tile and grout cleaning in Carefree. You have to mix equal parts of distilled white vinegar with water in a spray bottle. Then, spray the moldy area and let it sit for 30 minutes. Scrub the area with a brush and rinse with clean water.

With Hydrogen Peroxide

Hydrogen peroxide is another highly effective fungicide agent. You can mix it with water and spray it on the moldy grout, or you can mix it with white flour to create a paste. Apply the paste to the grout and let it sit overnight before rinsing it with cold water.

When Should I Contact A Grout Cleaning Service?

Although these techniques are great to clean your tile grout, you are likely to contact a professional grout cleaning service at some point. In that case, you count on Desert Tile & Grout Care to obtain an efficient cleaning service. We are an Arizona-based company that works in providing top-industry tile and grout cleaning services throughout the Phoenix Valley. Feel free to call us or email us to receive a free quote ASAP.